| Last Modified: 11-29-2007 | 1.6 C | |
| Service Category: Suspension | Section: Tire Pressure Monitoring | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002DZY01UX |
| Title: TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: DESCRIPTION (2008 Sequoia) | ||
|
DTC |
C2171/71 |
Transmitter ID not Registered |
DESCRIPTION
The transmitter IDs of each tire pressure warning valve and transmitter are registered to the tire pressure warning ECU.
When the IDs have never been registered, a DTC is stored.
|
DTC Code |
DTC Detection Condition |
Trouble Area |
|---|---|---|
|
C2171/71 |
Transmitter ID is not registered (when a transmitter ID is unregistered for 3 minutes or more). |
Tire pressure warning ECU |
INSPECTION PROCEDURE
NOTICE:
- When replacing the tire pressure warning ECU, read the transmitter IDs stored in the old ECU using the Techstream and note them down before removal.
-
It is necessary to perform initialization
after registration
of the transmitter IDs into the tire pressure warning ECU after the ECU has been replaced.
PROCEDURE
|
1. |
CONFIRM REGISTRATION CONDITION (REGISTERED TRANSMITTER IDS) |
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON and turn the Techstream on.
(d) Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
(e) Check the values by referring to the table below.
Tire Pressure Monitor
|
Tester Display |
Measurement Item/Display |
Normal Condition |
Diagnostic Note |
|---|---|---|---|
|
Registered ID1 Code |
Registered ID1 code/ min.: 0 max.: FFFFFFFF* |
The transmitter ID registered in the transmitter ID1 is displayed |
*: Displayed only when the transmitter ID is not registered. |
|
Registered ID2 Code |
Registered ID2 code/ min.: 0 max.: FFFFFFFF* |
The transmitter ID registered in the transmitter ID2 is displayed |
*: Displayed only when the transmitter ID is not registered. |
|
Registered ID3 Code |
Registered ID3 code/ min.: 0 max.: FFFFFFFF* |
The transmitter ID registered in the transmitter ID3 is displayed |
*: Displayed only when the transmitter ID is not registered. |
|
Registered ID4 Code |
Registered ID4 code/ min.: 0 max.: FFFFFFFF* |
The transmitter ID registered in the transmitter ID4 is displayed |
*: Displayed only when the transmitter ID is not registered. |
Result
|
Result |
Proceed to |
|---|---|
|
The registered transmitter IDs are not displayed on the Techstream screen. |
A |
|
The registered transmitter IDs are displayed on the Techstream screen. |
B |
|
|
2. |
PERFORM REGISTRATION (TRANSMITTER ID) |
(a) Register the transmitter IDs for all 4 tires
.
|
|
3. |
PERFORM INITIALIZATION |
(a) Perform initialization
.
|
|
4. |
CONFIRM TIRE INFLATION PRESSURE (DATA LIST) |
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON and turn the Techstream on.
(d) Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
(e) Check the values by referring to the table below.
Tire Pressure Monitor
|
Tester Display |
Measurement Item/Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|
|
ID1 Tire Inflation Pressure |
ID1 tire inflation pressure / min.: Absolute pressure / 100 kPa (1 kgf/cm2, 14 psi), Relative pressure / 0 kPa (0 kgf/cm2, 0 psi) max.: Absolute pressure / 449.35 kPa (4.6 kgf/cm2, 65 psi), Relative pressure / 349.35 kPa (3.6 kgf/cm2, 51 psi) |
Actual tire inflation pressure |
If 100 kPa (1 kgf/cm2, 14 psi) is displayed for absolute pressure or 0 kPa (0 kgf/cm2, 0 psi) is displayed for relative pressure, data has not been received*. |
|
ID2 Tire Inflation Pressure |
ID2 tire inflation pressure / min.: Absolute pressure / 100 kPa (1 kgf/cm2, 14 psi), Relative pressure / 0 kPa (0 kgf/cm2, 0 psi) max.: Absolute pressure / 449.35 kPa (4.6 kgf/cm2, 65 psi), Relative pressure / 349.35 kPa (3.6 kgf/cm2, 51 psi) |
Actual tire inflation pressure |
If 100 kPa (1 kgf/cm2, 14 psi) is displayed for absolute pressure or 0 kPa (0 kgf/cm2, 0 psi) is displayed for relative pressure, data has not been received*. |
|
ID3 Tire Inflation Pressure |
ID3 tire inflation pressure / min.: Absolute pressure / 100 kPa (1 kgf/cm2, 14 psi), Relative pressure / 0 kPa (0 kgf/cm2, 0 psi) max.: Absolute pressure / 449.35 kPa (4.6 kgf/cm2, 65 psi), Relative pressure / 349.35 kPa (3.6 kgf/cm2, 51 psi) |
Actual tire inflation pressure |
If 100 kPa (1 kgf/cm2, 14 psi) is displayed for absolute pressure or 0 kPa (0 kgf/cm2, 0 psi) is displayed for relative pressure, data has not been received*. |
|
ID4 Tire Inflation Pressure |
ID4 tire inflation pressure / min.: Absolute pressure / 100 kPa (1 kgf/cm2, 14 psi), Relative pressure / 0 kPa (0 kgf/cm2, 0 psi) max.: Absolute pressure / 449.35 kPa (4.6 kgf/cm2, 65 psi), Relative pressure / 349.35 kPa (3.6 kgf/cm2, 51 psi) |
Actual tire inflation pressure |
If 100 kPa (1 kgf/cm2, 14 psi) is displayed for absolute pressure or 0 kPa (0 kgf/cm2, 0 psi) is displayed for relative pressure, data has not been received*. |
HINT:
- *: It may take about 5 to 6 minutes until the values are displayed.
- When no "ID Tire Inflation Pressure" has changed, rotate the tire 90 to 270°. Then recheck it.
Result
|
Result |
Proceed to |
|---|---|
|
All tire pressure readings are equal to specified values. |
A |
|
Tire pressure values are not displayed. |
B |
|
|
|